Cranage LISN Model P2146 One Line V-Network (CISPR16)


General

This LISN complies with CISPR16 (Band B) specifications for measuring radio disturbances on AC/DC power lines. It is used in conjunction with a spectrum analyser or receiver for measuring peak, quasi-peak, average or rms noise amplitudes.

Technical Specification

 Model P2146 LISN is a three terminal device, one terminal earthed, to be series connected between the power source and the primary power input of the EUT. It is a robust, high stability unit which meets the impedance/frequency characteristics specified in CISPR16. A shielded input capacitor (4mF) is incorporated for improved performance and safety. The measurement socket is intended to be externally terminated at 50W by the measuring equipment. The case of the LISN is bonded to the ground plane via four M6 screws. An M8 earth stud is also provided for additional earth bonding
Frequency Range:  
Current Rating:     
Voltage Rating:     
Network paramters:
Connectors:   
               
            
                    
Insertion Loss:   
Dimensions:   
                   
Material:         
 150kHz to 30MHz
100A continuous
450V AC (850V DC)
50W / 5mH
Measurement (output): N-type bulkhead (50W)
Line (input): 6mm shrouded 'snap-lock'
EUT (output): 6mm shrouded 'snap-lock'
(6mm shrouded plugs supplied)
0dB
600 (l) x 200 (w) x 200 (h) mm
(600mm includes bolt-down mounting flange on base of unit)
Aluminium, alochrom treated, black durable paint finish on top surfaces

LISN ordering details: Model P2146

Warning! This product does not contain internal transient protection. External transient limiting devices are recommended to be fitted to the measuring output socket to protect the input of measuring equipment.

Warranty on Lisns

All parts on these products are warranted by the manufacturer: Cranage EMC Technology Limited, Stable Court, Oakley, Nr. Market Drayton, Shropshire TF9 4AG: against defects in materials or workmanship for a period of 12 months from the date of purchase.