Our calibration laboratory is set-up to perform measurements of impedance and insertion loss over the frequency range 20Hz to 500MHz with automated systems to offer cost-effective results. All measurement equipment including precision short circuit and 50W standards are calibrated annually with UKAS traceability.

Products manufactured by Cranage EMC Technology Limited are also backed up by extensive calibration facilities for the measurement of inductance, capacitance, and resistance. Many of our products have been independently calibrated with UKAS traceability and this has served to verify our measurement results.

LISN's, PLIP's and CDN's are initially supplied calibrated with results documented according to our calibration procedures.

Annual re-calibration is also provided on a standard traceability basis. You would receive a bound calibration record for each product submitted with measurement results and details of procedures used. This service is quoted inclusive of return UK carriage cost and is offered on a 5 days turnaround. This service is also available for other makes of LISN, CDN and voltage probe. Products accepted for re-calibration under this scheme will be checked for compliance with published specifications.

Cranage EMC & Safety
Stable Court,
Oakley, Market Drayton,
Shropshire,
TF9 4AG.
UK.

Homepage - www.cranage.co.uk

E-mail - info@cranage.co.uk

Tel: +44 1630 658568
Fax: +44 1630 658921