At Cranage we have many unique test facilities that enables us to carry out numerous and specialised EMC tests. Test room 3 is the largest screened room at Cranage designed to provide a large EMC test capability. This then offers practical and cost-effective EMC Testing for larger machinery and unusual loads. Married together with a heavy duty turntable and mechanical handling capabilities of up to two tonnes. No. 3 Test room has been located close to the open area test site (OATS). This has additional benefits when changing from immunity to emissions tests, and consequently having to move large machinery to perform emissions testing outside.

The Working Measurements Of T3 (Pictured right)

Width = 3.2m
Length = 4.3m

Loading bay door

Width = 2m
Height = 2.8m
Step on entrance = 0.19m

The working measurements of T1
(Not pictured)

Workable area

Width = 2.5m
Length = 3.7m
Height = 2.3m

As well as two screened rooms we also possess an open area test site for performing emission testing on your products.

Left and bottom right:- This is the outside test facility

Measurements Of Open Area Test Site

Entrance width= 2.2m
Entrance height = 2.98m

Maximum height inside building = 3.67m
Length of building = 2.9m

Distance from centre of turntable to control room = 20.36m (see diagram left)

Distance from centre of building to tip of the antenna= 10m
Please don't hesitate to contact us if you require any more details regarding our facilities at Cranage.