Cranage LISN Model VN3-100S Four Line V-Network


General

A LISN is used in conjunction with a spectrum analyser or receiver for measuring high frequency noise conducted on AC/DC power lines. It is located between the incoming supply and the Equipment Under Test (EUT). In addition to complying with CISPR16 specifications for the industrial, residential, and commercial environments, the Cranage VN3-100S LISN contains a bi-directional transient voltage limiter and wideband power attenuator which prevents front-end damage to receivers and analysers.

Technical Specification
Current range:    
Voltage range:   
Network parameters: 
Line Frequency range:
Earth Leakage current:
Connectors:            
               
               
     
     
Controls:  
Indicators:     
RF output:       
Insertion Loss:  
Transient Protection Level:
Op. Temperature: 
Dimensions:
Construction:   
    		 up to 100A AC/DC max. per line
up to 275V AC/DC line-earth (440V rms AC line-line)
50W / 50mH
dc to 100Hz
80mA (typ) @50Hz (measured according to EN61010-1)
Line (input):6mm shrouded 'snap-lock' skts (L1, L2, L3, N, E)
EUT (output):6mm shrouded 'snap-lock' skts (L1, L2, L3, N, E)
Control:IEC/CEE22 input 240/120V AC 50/60Hz
Remote: 5-pin DIN
BNC: RF outputs, internally terminated at 50 ohms
Line Monitor: rotary switch for selecting L1, L2, L3, or N
Yellow LED's indicate monitored line
150kHz to 30MHz (Band B CISPR16 compliant)
0dB
150dBmV
-5 to +45 deg. C
429(H) x 530(W) x 522(D)mm
aluminium alloy instrument case, side extrusions incorporate carrying flange
Warranty on Lisns

All parts on these products are warranted by the manufacturer: Cranage EMC Technology Limited, Stable Court, Oakley, Nr. Market Drayton, Shropshire TF9 4AG: against defects in materials or workmanship for a period of 12 months from the date of purchase.