Cranage LISN Model VN1-13S Two Line V-Network
product safety testing

General

A LISN is used in conjunction with a spectrum analyser or receiver for measuring high frequency noise conducted on AC/DC power lines. It is located between the incoming supply and the Equipment Under Test (EUT). In addition to complying with CISPR16 specifications for the industrial, residential, and commercial environments, the Cranage VN1-13S LISN contains a bi-directional transient voltage limiter and wideband power attenuator which prevents front-end damage to receivers and analysers.

Technical Specification
Current range:        
Voltage range:       
Network parameters:  
Line Frequency range:    
Earth Leakage current:  
Connectors:               
                          
                 
    
Line input:
Protective Earth:
Functional Earth:

RF output:          
Insertion Loss:    
Transient Protection Level:
Op. Temperature:
Dimensions:       
Weight:
Construction:     
 up to 13A rms AC/DC max.
up to 275V rms AC/DC max.
50W / 50mH
dc to 400Hz
80mA (typ) @50Hz
EUT Line Output: 4mm shrouded (L1, N)
EUT Socket:UK, USA, Continental Options (L1, E, N)
BNC: RF outputs (L1, N), internally terminated at 50 ohms
Artificial Hand: 4mm socket
Flexible 2m cable, 3-core 1.5mm²
via 3-core flexible cable
Fixing flange: 4 off M5 clearance
Terminal post: 2BA nut
150kHz to 30MHz (Band B CISPR16 compliant)
30dB (correction factor must be added to readings)
150dBmV
-5 to +40 deg. C
300(l) x 180(w) x 80(h)mm
3.5kg
Alacrom coated aluminum alloy with black powder coated exterior finish and ventilated lid; conductive base incorporates a fixing flange for low-ohmic contact with the test area ground plane.
Warranty on Lisns

All parts on these products are warranted by the manufacturer: Cranage EMC Technology Limited, Stable Court, Oakley, Nr. Market Drayton, Shropshire TF9 4AG: against defects in materials or workmanship for a period of 12 months from the date of purchase.